Electrical Metallic Tubing (EMT) Machine For Electrical Welded Pipe For Cable Protection

Product Detail

Model: RT50 (63.5mm×2.5mm)

The RT50 EMT Galvanized steel pipe mill is intended for manufacturing of round pipe of F19mm-F63.5mm with Thickness of 0.8mm–2.5mm from galvanized coil strip. 




Brief Introduction for EMT Pipes

Electrical metallic tubing (EMT), also commonly called thin-wall, is a listed steel raceway of circular cross section, which is unthreaded, and nominally 10' long. 20' lengths are also available. Covered by Article 358 of the NEC, EMT is available in trade sizes 1/2 through 4. The outside is galvanized for corrosion protection and the inside has an approved corrosion-resistant organic coating. EMT is installed by use of set-screw or compression-type couplings and connectors. It is permitted to have an integral coupling comprised of an expanded, “belled” shape tube on one end with set screws. EMT with integral couplings is available in trade sizes 1-1/4 through 4.




Features of RT50 Pipe Making Machine

This RT50 Electric pipe making machine is used to produce straight seam automatic EMT pipes tubes by means of steel slit strips with its subsequent welding into tube, edge heating by means of solid state high-frequency welder, longitudinal straight seam welding in rolls of tube welding machine, as well as equips with inner side scraping unit, cooling, further sizing or shaping and on-stream cutting of endless tube in measured lengths.




Process Flow of Steel Pipe Mills

Steel strips ---- double side decoiler ---- shear and butt welder ---- vertical accumulator ---- pinch roll + leveler, forming device, welding device ---- cooling unit ---- sizing and turk’s head ---- computer saw --- run out rack 



Technical Parameter for RT50 Electric Metallic Tubing Machine

Specification:

Pipe sizes



Machine configurations 

(1)    Double-side Un-coiler (manual expansion)

(2)    Vertical Accumulator

(3)    Shear & Butt-welder

(4)    Forming, Welding and Sizing mill

        A) Feeding & Leveling device

        B) Forming machine

        C) Guiding, extruding, Welding & scraping device, 

        D) Zinc Spraying Device

        E) One set of cooling water tank

        F) Sizing mill 

        G) Main Driving System

(5)    Cold Cutting Saw

(6)    Finished Pipe Passing Conveyor (Run out table)

(7)    HF Electric --- 150KW

(8)    Pneumatic System

(9)    Electrical System with PLC Control and DC Drive Control System

(10) Rolls (Moulds)




Delivery time:  90~120 days 




Shipping container:  3×40’HQ 




Photos for Reference

Manual Uncoiler	Accumulator	Forming Part
Drive Unit	Inner Scraper	Welding Roller
Outside Scraper	Scrap Recoiler	Water Tank
Sizing Part	Straightener	Cold Cutting Saw




Product Applications